For ongoing supplies, we can open an account for you. For one off orders, use your credit or debit card.
For most orders from stock, we can offer next working day delivery for orders placed before midday.
We recommend usage of hydraulic pressed slabs of minimum 38mm thickness for 450mm x 450mm and 50mm thickness for 600mm x 600mm slabs.
PavePad is suitable for use on Asphalt, Bituminous Felt, Pvc Single Ply Membrane and Liquid Coating Roofing Systems.
The 180mm diameter of the PavePad acts as a load spreader and makes it suitable for most common roof insulation’s, unlike many alternatives.
There is no maximum height, however, practically speaking the height you can achieve will depend on the slope and the edge restraint of the roof.
You will need to consider and put in place adequate protection from falls from height to perimeters.
Yes, however consideration should be given to the structural capacity of the roof to accommodate the additional load.
Yes, it can be used for free drainage below timber deck planks.
Yes, PavePad comes in different heights and can be stacked to obtain the varying heights on different parts of the roof.
The number of Pads you require for a job depends on the size of the roof area, the paving slab size and the height you wish to attain. We would be happy to help you calculate the quantities required.